We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

3-pin Sight for Recurve Bow: How to Mount and Set One Up (6 Steps)

Learn how to choose, mount and sight in a 3-pin sight for recurve bow. Step-by-step setup tips for beginners, plus common mistakes to avoid.

Updated November 2026

A 3-pin sight for recurve bow gives you three fixed reference points, one for each distance you plan to shoot, so you can aim the same way every time. This guide walks you through choosing a sight, mounting it on a recurve riser, and setting the pins for accurate shooting at known distances. Most of the work is patience and measurement, not special tools.

Choose the Right Sight for Your Recurve

Recurve sights come in several styles, so start by matching the sight to your bow. Look at the riser’s sight window or the mounting holes on the riser, and check that the sight’s mounting bracket fits your bow’s bolt pattern. Many manufacturers list compatible riser types, so confirm that before you buy.

Shopping for one? See our guide: 6 Best Recurve Bow Fishing Kit Options for Beginners (2026).

Next, decide how you want to adjust the pins. Some sights offer micro-adjustment knobs for windage and elevation, which makes fine tuning easier. Others rely on simpler slot adjustments. Beginners usually benefit from micro-adjust because small changes are easier to make without disturbing a sight that is already close.

Mount the Sight Securely

Mount the sight with the bow unstrung and resting on a stable surface. Attach the bracket loosely first, then position the sight so the pin guard sits straight and the sight housing is centered on the arrow line. Tighten the screws gradually and evenly to avoid warping the bracket.

  1. Unstring the bow and place it on a padded surface.
  2. Attach the sight bracket with the screws finger-tight.
  3. Center the sight housing over the arrow shelf and riser.
  4. Check that the pins sit level and the guard clears your arrow fletching.
  5. Tighten all screws to the torque your sight manufacturer specifies.
  6. Recheck alignment after the first few shooting sessions.

Set Your Pins for Known Distances

Pin sighting works best when you shoot from fixed, measured distances. Start by placing a target at 10 yards, shoot a group of arrows, and adjust the top pin until your arrows hit the center. Then move the target to 20 yards and set the middle pin, and finally set the bottom pin at 30 yards. Using the same anchor point and draw length every time keeps the process consistent.

Adjust in small steps. A single full turn of a micro-adjust knob can move your point of impact noticeably, so make one change at a time and shoot a few arrows before adjusting again. If your groups drift left or right, adjust windage. If they consistently hit high or low, adjust elevation.

Practice With Your New Sight

Once the pins are set, shoot at a consistent rhythm. Focus on your anchor point, release and follow-through rather than the pins themselves. Many new shooters chase the pin, which causes flinching and inconsistent groups. A steady anchor and smooth release do more for accuracy than any sight adjustment.

Tips and Common Mistakes

  • Do not set pins at uneven or guessed distances; measure every marker.
  • Recheck pin alignment after changing arrows or adjusting your draw length.
  • Avoid over-tightening sight screws, which can strip threads or crack a bracket.
  • Keep the sight clean and free of dirt that can block adjustment knobs.
  • Store the bow with the sight protected so pins are not bent or knocked out of place.
  • Micro-adjust recurve sight: Fine windage and elevation knobs make it easier to tune pins in small increments. View on Amazon
  • Bow square: Helps confirm the arrow is aligned with the sight window and riser before you set pins. View on Amazon
  • Target stand and foam target: A stable target lets you shoot repeatable groups at fixed distances. View on Amazon

If you are still picking out your first setup, the 7 Best Bows and Arrows for Archery Beginners in 2026 guide covers compatible gear, and the Archery Bow Arrows Set Guide: How to Choose the Right Setup explains how arrow spine affects your pin settings.

FAQ

How far apart should the pins be set?

There is no single rule, but common setups use distances such as 20, 30 and 40 yards for the three pins. Choose distances that match where you actually shoot, and measure them carefully.

Can I use a 3-pin sight on a traditional bow?

Most 3-pin sights are designed for recurve or compound bows with a sight window. Traditional bows without a sight mount are not compatible unless you add a suitable bracket, so check the bow’s riser before buying.

How often should I recheck my pin settings?

Recheck after any change to your arrows, draw length, string or sight hardware, and periodically as your form develops. Shooting groups at your set distances will show whether adjustment is needed.

Conclusion

A 3-pin sight for recurve bow becomes reliable once it is mounted square and each pin is set at a measured distance. Work in small adjustments, keep your anchor and release consistent, and recheck your settings as your shooting changes. With steady practice, the sight will give you repeatable aim at every distance you use.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our fishing & archery gear for beginners guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Anglers and Archery.