Compound Bow Sight Tape: How to Mark and Set Your Sight in 6 Steps
Learn how to use compound bow sight tape to set accurate yardage marks for your pins. A step-by-step guide for beginners with a simple checklist.
Updated November 2026
A compound bow sight tape is a printed or adhesive strip that marks the distance from your sight pins to specific yardages. Once you set it up correctly, you can look at a target, judge the range, and pick the right pin without guessing. This guide walks you through choosing the tape, measuring your bow, and marking your sight so the results hold up in the field.
What You Need Before You Start
Before marking anything, gather the tools and supplies below. Working on a stable bench with good light makes the process far easier.
Shopping for one? See our guide: 5 Best Lancaster Archery Made to Order Arrows Compared for Every Bow.
- A bow fitted with its sight and at least one pin installed
- A sight tape or a blank tape strip that fits your sight’s pin guard or sight housing
- A tape measure marked in yards
- A target at a known, measured distance (20 yards is a common starting point)
- A fine-point marker or a fine-tip pen, plus a small square of thin cloth for cleaning
How to Mark Your Compound Bow Sight Tape
Step 1: Set Up a Measured Lane
Mark your shooting position and place the target at exactly 20 yards using the tape measure. Verify the distance from the target face, not the stand, because that is where the arrow point lands.
Step 2: Shoot a Test Group at 20 Yards
Shoot three to five arrows at the 20-yard target with your current pin set. Let the group settle before judging it. Adjust your sight housing until the group centers on the bull, then lock the sight in place.
Step 3: Mark the Pin Position
Once the sight is set, place the compound bow sight tape under the pin you are using for 20 yards. Line the tape up so the pin sits at the 20-yard mark. Press the tape firmly, then re-check that the pin still lines up with the target. If you want more background, see Compound Bow for Deer Hunting: Draw Weight, Setup and Shot Tips.
Step 4: Repeat for Each Distance
Move the target to 30 yards, shoot a new group, and adjust the pin until it lands on center. Mark that position on the tape. Repeat at 40 and 50 yards, or at the distances you actually hunt or shoot. Many shooters find that a clear, consistent tape is more useful than a long one with guesses on it.
Step 5: Label and Protect the Tape
Write each yardage clearly next to its mark. Use a fine marker and keep the lettering small so it does not cover the pin. Seal the tape with clear tape or a thin layer of sealant so sweat and rain do not blur the numbers.
Step 6: Verify at Real Distances
Shoot at unknown distances and check the result against your tape. Confirm the readings with a laser rangefinder if you have one. If a mark is consistently off, re-shoot that distance and correct the tape.
Common Mistakes
- Marking the tape from a bench rest instead of shooting from a real stance, which changes your anchor and sight picture.
- Trusting a single arrow instead of a group of three to five arrows.
- Skipping re-checks after you change arrows, string, or draw length.
- Writing yardages too large, so the numbers cover the pins.
- Leaving the tape exposed to heat, moisture, or direct sun, which can cause it to peel or fade.
Recommended Gear
A clean, fine-tip marker makes readable yardage labels easier to write and keeps them legible through the season. View on Amazon
Clear protective tape helps seal your marks against sweat and rain so the numbers stay sharp. View on Amazon
A laser rangefinder lets you confirm distances before you draw, which makes your tape marks easier to trust. View on Amazon
If you are still choosing your first setup, the guides on Archery Bow Arrows Set Guide: How to Choose the Right Setup and 7 Best Bows and Arrows for Archery Beginners in 2026 cover the gear that works with a sight tape. Pairing a well-set sight with the right arrows, such as the options in Top 5 Custom Arrows for Archery: Compared for Every Bow, gives you more consistent groups.
FAQ
How often should I re-mark my compound bow sight tape?
Re-check the tape at the start of each season and any time you change arrows, string, draw length, or sight position. A quick check at 20 yards will show whether the marks still hold.
Can I use a sight tape with any compound bow?
Most sight tapes work with standard pin sights, but the fit depends on your sight housing and pin guard. Check the product specifications against your sight before buying.
Do I need a rangefinder to mark my tape?
A rangefinder is not required, but measuring the target distance with a tape is essential. A rangefinder is useful for confirming marks at unknown distances afterward.
Conclusion
A well-marked compound bow sight tape turns guesswork into a quick reference you can trust. Take your time with the 20-yard setup, shoot real groups at each distance, and protect your labels from the weather. Re-check your marks whenever your gear changes, and your pins will stay accurate in the field.
Related reading
Ready to choose one?
