Lancaster Archery Easton Arrows: A Beginner’s Guide to Choosing the Right Shafts
Learn how lancaster archery easton arrows are sized, spined and matched to your bow, plus the mistakes beginners make when ordering them.
Updated November 2026
Lancaster Archery is a well-known source for Easton arrows, and buying them well comes down to three things: the right spine, the right length and the right point weight. This guide walks you through each one so you can order a shaft set that flies straight from your first shot. It also covers the checks you should make before you commit.
Step 1: Measure Your Draw Length
Draw length is the starting point for any arrow order. Stretch your arms out to the sides, measure from fingertip to fingertip, and divide by 2.5. Most archers then add about 1 inch for a safety margin when ordering, but confirm the exact figure with your bow’s specifications or a pro shop. A shaft cut too short is unsafe, so when in doubt, go slightly long.
Step 2: Match the Spine to Your Bow
Spine describes how much an arrow flexes when it is released. A lower spine number means a stiffer shaft. Lancaster Archery and Easton publish spine charts that pair draw weight and arrow length with a recommended spine, and these charts are the best reference you have. If your draw weight or length sits between two spine values, ask whether a point weight adjustment will close the gap.
Step 3: Choose Point Weight and Components
Point weight changes how the arrow balances and how it flies. Heavier points generally improve stability and forgiveness at longer distances, while lighter points tend to suit fast, flat-trajectory shooting. Manufacturers specify a grain range for each shaft, so keep your total arrow weight within that window. Finally, pick your nock fit, fletching type and insert style to match your bow’s nock system.
Shopping Checklist
- Draw length, measured and rounded up for safety.
- Draw weight at your bow’s rated setting.
- Target spine from the manufacturer’s chart.
- Shaft length, including a cutting allowance if you plan to trim.
- Point weight within the manufacturer’s stated range.
- Nock size and fletching style compatible with your bow.
Step 4: Check the Fit Before You Shoot
Once arrows arrive, inspect each shaft for straightness and check that the nock fits snugly without splitting. Shoot a few arrows at a close target and watch how they group. Paper tuning, which uses a sheet of paper stretched across a frame, shows whether the arrow is flying straight. If the tears show a consistent tail-left or tail-right pattern, your spine or nock point may need adjusting. A pro shop can help with a bare-shaft test if you are not sure what you are seeing.
Common Mistakes to Avoid
- Ordering by bow model alone instead of by draw length and draw weight.
- Ignoring the spine chart and buying the lightest-looking option.
- Cutting shafts without re-checking the total arrow weight.
- Mixing point weights within a set, which causes inconsistent flight.
- Skipping inspection of new arrows for cracks or bent shafts.
Recommended Gear
A digital scale helps you confirm the finished arrow weight, which is essential after any cutting or point changes. View on Amazon
A paper tuning frame gives you a simple, repeatable way to check arrow flight at home. View on Amazon
A bow square and nock pliers make it easier to set nock point consistently on each shaft. View on Amazon
For more background on choosing shafts, see Archery Bow Arrows Set Guide: How to Choose the Right Setup and Safe Arrows for Archery: A Beginner's Guide to Choosing Them Right. If you are comparing brands, 5 Best Lancaster Archery Made to Order Arrows Compared for Every Bow lays out the main options side by side.
FAQ
Do I need to know my spine before ordering?
Not always, because many sellers can recommend a spine if you provide your draw weight, draw length and bow type. Still, knowing your target spine helps you judge whether a recommendation makes sense.
Can I cut Easton shafts to a custom length?
Yes, but recheck the total arrow weight after cutting and adjust point weight if needed. Cutting too short can create a safety hazard, so measure carefully.
How often should I inspect my arrows?
Check them before each session for cracks, bends and loose inserts or nocks. Retire any shaft that shows damage, and consult a professional if you are unsure whether an arrow is safe to shoot.
Conclusion
Getting lancaster archery easton arrows right starts with accurate draw length and a spine that matches your bow. Use the manufacturer’s charts, keep your arrow weight within the stated range and test the setup before relying on it. A careful first order will save you time and frustration on the range.
Related reading
- Wooden Arrows for Archery: A Beginner's Guide to Choosing and Caring for Them
- Victory Archery VForce Arrows Review: Features and Performance
- Top 5 Practice Arrows for Archery Worth Considering in 2026
Ready to choose one?
