Long Line Fishing Kit: A Step-by-Step Guide for Beginners
Learn how to assemble a long line fishing kit step by step, from mainline and leaders to hooks, weights and storage, so your first setup is ready to fish.
Updated November 2026
A long line fishing kit is a set of mainline, leaders, hooks, weights and floats that lets you fish a long run of baited hooks from one anchor point. Building one yourself teaches you how each piece works together and keeps the cost of gear low. This guide walks you through choosing components, assembling the line and storing it so it is ready for the next trip.
Choose Your Mainline and Leader Materials
Start with the mainline, the heavy line that runs the full length of the setup. Many beginners use monofilament in the 50 to 80 pound range because it is forgiving, easy to knot and inexpensive. Leaders, the shorter lines that connect each hook to the mainline, should be one step lighter or the same weight, so that a snag breaks a leader rather than the whole line. For a hand-line or long-line setup, a 30 to 40 pound leader is common for mid-sized fish. If you are unsure which material suits your water, Mono Fishing Line vs Fluorocarbon: Which Should You Choose? explains the trade-offs clearly.
Shopping for one? See our guide: 5 Best Hand Line Fishing Kit Picks for Beginners (2026).
Assemble the Line in Order
Build the rig on a flat surface so the line lies straight. Work through these steps:
- Cut the mainline to the length you plan to fish, adding 3 to 4 feet at each end for handling.
- Tie a sturdy knot, such as a improved clinch or a Palomar, to attach each leader to the mainline. Space leaders 3 to 6 feet apart so hooks do not tangle.
- Tie a hook to the free end of each leader using a knot you can tie reliably by feel.
- Crimp or clip a weight 12 to 18 inches above each hook, or place a single weight at one end of the line if you are using a slack-line method.
- Attach a float or buoy at each end and check that the line sits without kinks.
For knot choices, Palomar Knot Fishing Line: 7 Best Lines to Tie It With (2026) covers one of the most dependable options for beginners.
Add Weights, Floats and Tackle
Weight placement controls how the bait sits in the water. Heavier weights keep the bait on the bottom in current, while lighter weights let it drift. If you are unsure where to clip them, Where to Put Weights on Fishing Line: A Step-by-Step Guide for Beginners shows common placements. Keep a small set of spare hooks, swivels and split rings in a tackle box so you can repair a rig on the water.
Store and Organize the Kit
Coiled line stays usable longer when it is stored properly. Wind mainline onto a board or spool so it does not fold into loops, and keep leaders on a separate organizer so hooks stay separated. A leader organizer keeps hooks from snagging each other and makes rigs faster to set up. Rinse the line in fresh water after saltwater use and let it dry out of direct sunlight before storing it.
Checklist: What You Need
- Mainline, cut to length
- Leader line, pre-cut to your spacing
- Hooks in one or two sizes
- Split shot or sinkers
- Floats or buoys
- Swivels and split rings
- Pliers or line cutters
- Storage board or spool
Recommended gear
A leader organizer keeps pre-tied rigs separated and tangle-free between trips, which makes setup much quicker. View on Amazon
A set of split shot in assorted sizes lets you adjust weight without retying anything on the water. View on Amazon
Common Mistakes
- Using leaders heavier than the mainline, which lets a snag break the whole rig.
- Placing hooks too close together, so they tangle when the line moves.
- Skipping a fresh knot check after each use, which often hides nicks or abrasion.
- Storing line in direct sun or heat, which weakens monofilament over time.
FAQ
How long should a long line be?
Most beginners start with a line between 50 and 100 feet, which is easy to handle and set. Longer lines need more space and more careful storage.
Can I use braided line for the mainline?
Yes, braid works well for long runs because it has little stretch, but it needs a sturdier knot at each leader connection. Check your knot strength before relying on it.
How often should I replace the leaders?
Replace any leader that shows fraying, nicks or whitening, and check them after every trip. Manufacturers generally advise against reusing damaged line.
Conclusion
A long line fishing kit becomes simple once you understand the mainline, leaders, weights and storage. Build it in order, check each knot, and keep spare tackle close by. Start with a short line you can manage, then expand as you learn how your local water behaves.
Ready to choose one?
