Set of Six Arrows in Archery: How to Choose and Match a Dozen-Free Set
Learn how to choose a set of six arrows in archery, matching spine, length, weight and fletching so your group stays tight and your bow performs well.
Updated November 2026
A set of six arrows in archery gives you enough shafts for a practice session without buying a full dozen, and it works well for beginners who want to build a consistent group. To get the most from one, you need to match the arrows to your draw length, bow weight and shooting style. This guide walks through how to check those factors and keep the set matched over time.
Why Six Arrows Make Sense for Most Beginners
Six arrows is a practical number. You can shoot three ends of two arrows or two ends of three, and you can still spot whether a flyer is due to form or to the arrow itself. A matched set also lets you compare groups fairly, since every shaft should react to the bow the same way. A larger quantity is useful later, but a six-pack keeps early spending focused on fit rather than volume.
Shopping for one? See our guide: Top 5 Practice Arrows for Archery Worth Considering in 2026.
Step 1: Measure Your Draw Length
Arrow length depends on your draw, not your height alone. Stand with your arms out to the sides, measure from fingertip to fingertip, and divide by 2.5. Most beginners land somewhere between 26 and 30 inches. Ask the seller whether their listed length includes the nock and point, since some shafts are sold cut to a specific length and others come longer.
Step 2: Match Spine and Point Weight to Your Bow
Spine describes how much a shaft flexes when a weight is hung from its center. Manufacturers publish spine charts keyed to draw weight and arrow length, and the chart is the starting point. A shaft that is too stiff will tend to fly to the left for a right-handed archer, and a shaft that is too weak will flex wildly and land to the right. Point weight changes the same balance, so if you adjust tips, check the spine again.
Quick Fit Checks
| Symptom | Likely cause |
|---|---|
| Arrows tail left (right-handed archer) | Spine too stiff, or point weight too light |
| Arrows tail right | Spine too weak, or point weight too heavy |
| Arrows fly high or low as a group | Nock height, tiller or release, not the set |
Step 3: Check Consistency Across All Six
Once you have the right spine, confirm that all six shafts are identical in length, straightness and weight. Weigh each arrow with its nock and point attached and keep them within a grain or two of each other. Roll each shaft on a flat surface to spot bends. Mark the set with a number on each shaft so you can track which arrow caused a problem during a session.
Step 4: Maintain the Set
- Replace any shaft that cracks, splinters or shows a kink.
- Keep fletching tight and replace feathers or vanes that lift.
- Store the set in a rack or tube so shafts do not press against each other.
Common Mistakes
- Buying by bow weight alone and ignoring draw length.
- Mixing arrows from different sets, which breaks the group comparison.
- Changing the point weight without rechecking spine.
- Ignoring small bends that look harmless but affect flight.
- Shooting a damaged shaft because it is one of only six.
Recommended Gear
A simple arrow scale helps you verify that each shaft matches the others in weight, which is harder to judge by eye. View on Amazon
A paper tuning tool or bow square lets you check nock height and the angle of your arrow rest before blaming the shafts. View on Amazon
A rack or arrow tube keeps six shafts separated and straight between sessions. View on Amazon
FAQ
How many arrows should a beginner start with?
Six is a good starting number because it lets you shoot several ends and still compare groups. You can add more of the same set once you know your fit.
Can I mix arrows from different sets?
It is better not to. Mixed shafts vary in spine and weight, which makes it hard to tell whether a flyer comes from your form or the arrow.
How do I know if my spine is correct?
Shoot paper or a bare-shaft test and watch the tail of the arrow in flight. If it consistently fishtails or drifts to one side, check your spine chart and point weight.
Conclusion
A set of six arrows in archery works best when every shaft matches your draw length, spine and weight. Measure first, confirm the fit with a tuning check, and keep the set straight and undamaged. If your groups still drift after that, consult a qualified archery pro or bow shop for a hands-on tune.
Related reading
- Suction Cup Arrows Archery-Set: Are They Safe and Do They Work?
- Archery Bow Arrows Set Guide: How to Choose the Right Setup
- Wooden Arrows for Archery: A Beginner's Guide to Choosing and Caring for Them
- Victory Archery VForce Arrows Review: Features and Performance
- Top 5 Custom Arrows for Archery: Compared for Every Bow
Ready to choose one?
