We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Use Snap Ring Pliers Fishing: A Step-by-Step Guide for Beginners

Learn how to use snap ring pliers for fishing, from opening split rings and attaching terminal tackle to safe handling. A clear beginner guide with steps.

Updated November 2026

Snap ring pliers, often sold alongside split ring pliers, let you open and close the small metal rings that hold hooks, spinners, and lures to your line or to each other. Once you know the grip and the motion, you can swap a treble hook or add a swivel in under a minute without mangling the ring. This guide walks through how to use snap ring pliers for fishing, from setup to finishing touches.

What You Need Before You Start

Before you work on your tackle, gather a few basics so you are not hunting for parts with wet or cold hands.

  • Snap ring pliers with a tapered, non-slip jaw tip
  • A flat, well-lit work surface with a towel or mat
  • The lure, hook, or swivel you plan to attach
  • Replacement split rings in a matching size, in case one gets bent
  • Safety glasses, since rings can spring free

How to Open and Close a Ring Correctly

The skill here is opening the ring sideways rather than pulling it apart. A split ring is a tight coil, and pulling outward stretches the wire and weakens the ring over time.

  1. Place one jaw tip between the coils at the split, near the end of the ring.
  2. Grip the other jaw on the outside of the ring, close to the first.
  3. Twist your wrist so the tip slides along the wire and pries the coil apart from the side, opening the gap about a quarter inch.
  4. Slide your hook eye or split ring onto the open coil, then reverse the twist to close the gap.
  5. Check that the ends meet cleanly with no gap showing.

Attaching a Hook, Lure, or Swivel

Once a ring is open, the attachment is simple, but the order matters. Thread the lure eye onto the ring first, then the hook or swivel eye, so the load sits evenly across the coil. Avoid stacking more than two items on one ring, since extra weight can open the coil over repeated casts.

Checking Your Work

After closing the ring, pull gently on each item. A properly closed ring will not separate, and the ends should overlap slightly rather than leave a visible gap. If the ring looks distorted or the coil is no longer round, replace it rather than trying to reshape it. For another angle, check out How to Use Fishing Pliers for Crimping, Cutting, and Hook Removal.

Handling Ring Size and Wire Thickness

Snap ring pliers work best when the jaws match the ring size. Very small rings, roughly under 6 mm in diameter, need a fine tip, while larger rings used for heavier lures or saltwater rigs may need a wider grip. Using pliers that are too large makes it hard to open the coil without scratching the finish. Thicker wire also resists opening, so take your time and widen the gap gradually rather than forcing it.

Common Mistakes

  • Pulling the ring apart in a straight line, which stretches and weakens the wire.
  • Opening the ring too wide, which can permanently deform the coil.
  • Attaching too many items to one ring, leading to fatigue and failure.
  • Reusing a ring that has already been opened several times.
  • Working without eye protection, since a ring under tension can snap free.

Look for a pair of snap ring pliers with a narrow, serrated or textured tip for grip on small rings.
View on Amazon

A small assortment of stainless split rings in several sizes lets you replace damaged rings without stopping your session.
View on Amazon

Safety glasses protect your eyes when a ring slips under tension.
View on Amazon

For related tools and techniques, see 6 Best Fishing Snap Ring Pliers for Anglers (2026) and 6 Best Split Ring Pliers Fishings: Top Picks for Anglers (2026). If you prefer a single tool for several jobs, 7 Best Fishing Multi Tool Pliers for Anglers in 2026 covers options worth considering. Anglers who carry their pliers on the water may also want Leather Fishing Pliers Sheath: How to Choose and Use One (Beginner Guide) or Lanyard for Fishing Pliers: How to Choose and Attach One (Beginner Guide).

FAQ

Can I use snap ring pliers on any size of split ring?

Most snap ring pliers handle a range of sizes, but very small rings need a fine tip and very large or thick rings may need a wider grip. Match the tool to the ring so you avoid bending the coil.

Why does my split ring keep coming open?

Usually the ring was overloaded, opened too wide, or pulled apart in a straight line, which weakens the wire. Replace the ring and open the next one from the side.

Is it safe to use snap ring pliers near the water?

Yes, as long as you wear eye protection and keep the work area dry and stable. If you have a hand injury or a condition that affects grip, consult a medical professional before handling small tackle for long periods.

Conclusion

Opening rings from the side, attaching items in the right order, and keeping loads light will protect your tackle and save time on the water. Practice on a few spare rings at home before you need to make a repair on the bank. With a little repetition, snap ring pliers become one of the quickest tools in your kit.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our fishing & archery gear for beginners guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Anglers and Archery.