We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Recurve Bow Hunting Sight: A Step-by-Step Guide for Beginners

Learn how to choose, mount and set a recurve bow hunting sight, from pin selection to sight-in at distance, so your shots land where you aim.

Updated November 2026

A recurve bow hunting sight gives you a fixed aiming reference so you can place arrows consistently at known distances. In this guide you will learn how a recurve sight differs from a compound setup, how to mount and set one, and how to sight it in for the ranges you plan to hunt. Most beginners can get a basic setup working in an afternoon with a stable target and a measuring tape.

Understand How a Recurve Sight Works

Unlike compound bows, recurve bows are usually shot without a let-off, so the draw weight stays fairly steady and the sight picture changes less from shot to shot. Traditional recurve hunters often use a single pin, a multi-pin bracket, or a sight that moves along the riser. Each pin is set for one distance, so the more pins you run, the more distances you can cover without adjusting your aim by feel. For a full walkthrough of pin setup, see Recurve Bow Sight Pins: A Step-by-Step Setup Guide for Beginners.

Shopping for one? See our guide: 6 Best Recurve Bow Fishing Kit Options for Beginners (2026).

Choose and Mount the Sight

Pick a sight that matches your bow’s riser and the number of distances you expect to shoot. Most mounts attach to the riser with screws, and many sit on a slotted bracket so you can move them up or down. Keep the mount secure but not overtightened, and confirm that the sight does not touch the arrow or the string at full draw. If you are adding a peep sight as well, install it according to Peep Sight on Recurve Bow: How to Install and Tune It (Step-by-Step).

Sight In Your Recurve Bow

Sighting in means adjusting each pin so the arrow hits your intended point of aim at a set distance. Work through the steps below.

  1. Set up a target at a known distance, starting with 10 yards.
  2. Shoot three to five arrows from a consistent stance and anchor point.
  3. Note where the group lands relative to your aiming spot.
  4. Loosen the pin and move it slightly in the direction of the group, then retighten.
  5. Repeat until the group is centered on your aim point.
  6. Move the target to the next distance and set the next pin the same way.

Record each pin position and distance on a card or in your phone so you can recheck the setup later. If you prefer a marked reference for quick adjustments, the method in Compound Bow Sight Tape: How to Mark and Set Your Sight in 6 Steps can be adapted to a recurve riser.

Practice at Hunting Distances

Hunting shots usually happen between 15 and 30 yards, and many of them are at unknown or sloped ranges. Practice shooting from different heights, such as from a ground blind or a tree stand if you hunt from one, and estimate distances before you check your pin. Consistent form matters more than any single sight setting. A sight can only help you if your anchor and release stay the same.

Common mistakes

  • Sighting in from a shaky or inconsistent stance, which makes every adjustment look wrong.
  • Measuring distance by eye instead of with a tape or rangefinder.
  • Moving several pins at once instead of changing one at a time.
  • Skipping a recheck after changing arrows, string or draw length.
  • Letting the sight rub the arrow fletching or string at full draw.

A sturdy target stand keeps your practice groups consistent from session to session, so the sight adjustments you make are based on real shots rather than a sagging target. A hard-sided bow case protects the sight and riser during travel to the range or the woods.

  • Target stand for recurve practice: a stable stand holds your target still while you adjust pins. View on Amazon
  • Hard bow case: protects the sight mount and riser when you transport the bow. View on Amazon

FAQ

How many pins do I need on a recurve hunting sight?

Many hunters use three to five pins to cover common distances, but a single pin with practice at multiple ranges can also work. Choose the number based on the distances you actually expect to shoot.

How often should I recheck my sight setting?

Recheck after any change to your arrows, string, draw length or sight mount, and at the start of each season. A quick group at a known distance is enough to confirm the pins are still on target.

Sight use is generally allowed for archery hunting, but rules vary by state and by species. Check your state wildlife agency’s archery regulations before your season, or ask a licensed hunting instructor if you are unsure.

Conclusion

A recurve bow hunting sight becomes reliable once it is mounted securely and sighted in at each distance you plan to shoot. Work through one pin at a time, record your settings, and keep your form consistent. Steady practice at realistic hunting ranges will do more for your accuracy than any single adjustment.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our fishing & archery gear for beginners guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Anglers and Archery.